The Lighting Controller

Yes, Companion is available for Windows

You can use Companion to send MIDI commands from the StreamDeck XL to The Lighting Controller. I believe there are other users on this forum who are deploying this solution

When you move the colour wheel channel, the fixture will respond in real life, but you won't see the colours in 3D view.

Hi, Thanks for the reply, What seems to happen is having a fader set at 6% or less is nothing but 7% up is full on. I don't mind that if i could figure out which profile icon would make the flow change. I've tried lots but none seem to make the flow change. The icon won't make any difference. The h...

The manual you've posted just has Channel 1 Fan (0-100%) Channel 2 Haze output (0-100%) That seems to be the only info provided. Hypothetically if you just put the fader at 50%, the fan should go at 50% speed, there's nothing more complicated than that. Do you have a fixture profile you can use? If ...

Thanks for reply. Like in my post, I made sure all other channels are disabled, just changing the dimmer channel. Every other channel is disabled for whole rig. Drives me nuts because the color chanel doesn't change or any other channel that is active but disabled for the dim 1+4 and dim 2+3 button...

I think the "Release All Buttons" status quo is fine. Very pleased to hear of the addition of different priority levels. This would be very useful!

Hi, I'd just like to ask if anyone here knows why the default position of PAN on startup is facing the right side (the handle side) instead of facing the side of the screen. Is there any way to configure this such that the head faces the screen on power on? Thank you. Yes. Use the fixture's onboard...

Hi Folks, So I’ve been using Showxpress for years now and installed it in a number of Bars/Nightclubs. It’s always been annoying that flash buttons don’t work properly with touch screens, you have to double tap or wiggle your finger. Windows doesn’t allow you to turn off multi-touch on tablets etc....

Do you have one of the USB to DMX interfaces connected? Artnet is not unlocked without one of these being plugged in

It works but then if I turn it off and on again, the light never turns on again. The light moves and goes through the programmed movements but doesn't light up again. Judging by your description, this fixture uses a traditional discharge lamp that must be "lamped on". Ie, the bulb inside ...