dmx setup,, please help!!!!!
-
- Posts: 10
- Joined: 23 August 2011, 08:09
dmx setup,, please help!!!!!
i know i´m a little bit boring but i need help,
i have phantom 250 spot connected to laptot(winxp) with cable.
i want to know where can i setup dmx adress so each one can work separeted. i setup dmx adress on phantom 250 spot, its oo1, and 015.
http://www.scribd.com/doc/16454359/Show ... pot-Manual#
i have phantom 250 spot connected to laptot(winxp) with cable.
i want to know where can i setup dmx adress so each one can work separeted. i setup dmx adress on phantom 250 spot, its oo1, and 015.
http://www.scribd.com/doc/16454359/Show ... pot-Manual#
Re: dmx setup,, please help!!!!!
The dmx addressing should be done in application "Setup" > tab "DMX addressing".
For more understanding of dmx addressing, we suggest you to import the "demo_show" and to study it.
For more understanding of dmx addressing, we suggest you to import the "demo_show" and to study it.
The Lighting Controller
-
- Posts: 10
- Joined: 23 August 2011, 08:09
Re: dmx setup,, please help!!!!!
can u do it for me, i dont know how to do it.. here are photos of my setup and u have manual for phantom spot 250 from my earlier post.support wrote:The dmx addressing should be done in application "Setup" > tab "DMX addressing".
For more understanding of dmx addressing, we suggest you to import the "demo_show" and to study it.
can u setup me dmx adress because my spot are not working properly,. i can´t move them separately.. please help help help...
![Sourit :)](./images/smilies/icon_e_smile.gif)
thank u milion times...
Re: dmx setup,, please help!!!!!
It looks like the fixture details and the dmx addressing are correctly done.
We do not understand what we have to do for you !
We do not understand what we have to do for you !
The Lighting Controller
-
- Posts: 10
- Joined: 23 August 2011, 08:09
Re: dmx setup,, please help!!!!!
i dont know, maybe it s problem in spots, i dont know what to do
(
![Triste :(](./images/smilies/icon_e_sad.gif)
Re: dmx setup,, please help!!!!!
In our side, the dmx addressing looks correct.
Please check that the dmx address of each light is correct.
Please check that the dmx address of each light is correct.
The Lighting Controller
-
- Posts: 10
- Joined: 23 August 2011, 08:09
Re: dmx setup,, please help!!!!!
one more question, what does it mean reverse tilt and pan? do i mark them on each head (on picture one) onre just one??
-
- Posts: 10
- Joined: 23 August 2011, 08:09
Re: dmx setup,, please help!!!!!
???????
-
- Posts: 30
- Joined: 01 August 2011, 21:34
Re: dmx setup,, please help!!!!!
Really? You know what your PAN and TILT are right? You know how to control those from DMX right? Now if you were to REVERSE it what do you think would happen? Possibly instead of Pan being Left To Right / 0 to 255 it would probably now be Right To Left / 0 to 255..... Right? Makes Sense?showband mondeo wrote:one more question, what does it mean reverse tilt and pan? do i mark them on each head (on picture one) onre just one??
You Would Use The Reverse Option if lets say one head was up right and one head was upside down. This way they both move the same direction.
-
- Posts: 1
- Joined: 27 September 2011, 13:04
Re: dmx setup,, please help!!!!!
Dear Support,
Good day.
This is hugh, one of our customer in Europe imported 12 RGB 36W LED Wall washer from us, but he said your Sweet light software can not identify our LED wall washer, and he said the wall washer can use the DMX 512 controller made in China, so my question can Sweet light software be applied for every RGB wall washer?Hank
This is very urgent, we need your reply.
Thanks very much.
please email me: hughhu(at)live.cn
Good day.
This is hugh, one of our customer in Europe imported 12 RGB 36W LED Wall washer from us, but he said your Sweet light software can not identify our LED wall washer, and he said the wall washer can use the DMX 512 controller made in China, so my question can Sweet light software be applied for every RGB wall washer?Hank
This is very urgent, we need your reply.
Thanks very much.
please email me: hughhu(at)live.cn