Page 1 of 1
Martin - MAC Encore Wash
Posted: 26 February 2018, 04:30
by SeekLighting
Hi Support,
Could you please create the fixture profile for the following fixture? The information required can be found on page 21-24 of the manual
https://www.martin.com/Martin.Download. ... h_EN_B.pdf
Regards,
Tim H
Re: [Request] Martin MAC Encore Wash
Posted: 06 March 2018, 03:58
by SeekLighting
Hi Support,
Please find attached my completed fixture profile for the Martin MAC Encore Wash. The control channels are particularly difficult but I tried to follow convention as best as possible.
Regards,
Tim H
Re: [Request] Martin MAC Encore Wash
Posted: 06 March 2018, 08:47
by support
Thank you.
Yes this brand is not easy.
Some tricks to save time.
Trick1
In the channel "
color", we suggest you to declare only the "
stepped scrolling" colors, and to put the level "
index" for the "
continuous srolling" colors.
And you can also put the same first/last values for the fixed colors (blue, green, ...). This gives for this fixture:
- open,0,0
index,1,160
blue,162,162
green,165,165
...
Trick2
In the channel "
FX Synchronization", there are levels "
Offset shift xx degrees" every 10 degrees from 10 to 350 degrees. They can be replaced by one level "
offset from 10 to 350 degrees" with the first/last dmx values 1/35.
Another thing to know: the character "," is not allowed in the level's names.
Added in the software's bank.