V8 does not show the dmx channels numbers

[support]

V7 is dmx based
"Steps" knows the dmx address of each fixture, so it is able show the dmx channels numbers.
But if you change the dmx address of a fixture in tab "Fixtures", the scene will not work anymore.

V8 is fixtures based
"Steps" knows only the ID of the fixture, and it does not know its dmx address, so it is not able show the dmx channels numbers.
If you change the dmx address of a fixture in tab "Fixtures", the scene will still work.

You can watch the dmx channels in the window "DMX bargraph".