Page 1 of 2
Midi input in HTP mode does not work in 3DView [fixed]
Posted: 03 March 2015, 15:37
by MTF Showtechnic
Hello,
I've assigned a red channel of a PARCAN to Midi by a rotary knob like the following:
CH2 - CC8, Priority ->HTP, DMX Channel 25
Made a scene for the PARCAN Channel 25(Red) Value 127, Channel 32(Dimmer) Value 255.
Assigned that scene to a button of Live Page and started it (Editor DMX & 3D View off)
Now I turned the rotary knob expecting that all Values greater than DMX Value 127 (this should be 64-127 of Midi)will increase the brightness of that red channel.
But HTP want work!
If I use Midi or Software as Priority everything is as desired.
Only checked that in 3D View - not live with DMX Equipment.
Is it a bug or am I doing wrong?
greetings from germany
Re: Bug in Midi at HTP ??
Posted: 05 March 2015, 17:07
by support
We just re-did a similar settings than yours (with V7.1.46), and it works with us.
Can you please double check with the "DMX channels" window (not the 3DView window) ?
Re: Bug in Midi at HTP ??
Posted: 05 March 2015, 18:19
by MTF Showtechnic
Checked - and alright. In the DMX Channels window I can see the expected behaviour.
Bug's in 3D View.
Gonna check it with DMX Equipment on saturday. Then you'll get another feedback.
greetings and thanks again for your excellent support.
Re: Bug in Midi at HTP ??
Posted: 06 March 2015, 19:37
by support
After a quick look in the source code, it might be possible that dmx output is ok, while 3D is not.
So you might be right.
We will come back to you asap regarding this matter.
Re: Bug in Midi at HTP ??
Posted: 10 March 2015, 13:42
by MTF Showtechnic
Sorry for the late answer: Priority HTP, Software, Midi with real Equipment works without faults.
Bug is in 3DView.
And a little blemish - see the attached picture.
German Text is in the file but this is the result.
It's in Preferences -> DMX & Midi Patch -> DMX Output.
greetings
Re: Bug in Midi at HTP ??
Posted: 11 March 2015, 08:46
by support
Wrong German text and 3DView bug are fixed for next version.
Re: Midi input in HTP mode does not work in 3DView [fixed]
Posted: 21 March 2015, 09:08
by MTF Showtechnic
Hey,
I just downloaded the next fixed .exe File 7.1.50 and the .ini
But it looks like that you've forgotten the wrong german text!?
It's still wrong
3DView Bug checked and fixed.
Re: Midi input in HTP mode does not work in 3DView [fixed]
Posted: 21 March 2015, 14:56
by support
You have also to copy/paste the ".ini" language files from the zip, in their correct location.
Re: Midi input in HTP mode does not work in 3DView [fixed]
Posted: 21 March 2015, 15:50
by MTF Showtechnic
Yes I've done this.
Checked on 3 Pc's. Doesn't work.
Location on my PC's : Sweetlight - TheLightingController - Language.
Re: Midi input in HTP mode does not work in 3DView [fixed]
Posted: 21 March 2015, 16:54
by support
We just double checked ; you are right.
It is a small mistake with a non expected capital letter ("Txt_DO_Universe" instead of "Txt_DO_universe").
Fixed in the attached file.