CDS-RGY200L laser

ask here the fixture profile you need for Editor
Post Reply
DJ~MMiMER
Posts: 7
Joined: 25 October 2012, 06:21

CDS-RGY200L laser

Post by DJ~MMiMER »

I could only get the file that was sent to me in excel format.
support
Administrateur
Posts: 11024
Joined: 07 December 2009, 16:32

Re: CDS-RGY200L laser

Post by support »

You can add a post with an attached ZIP file of the XLS file.
The Lighting Controller
DJ~MMiMER
Posts: 7
Joined: 25 October 2012, 06:21

Re: CDS-RGY200L laser

Post by DJ~MMiMER »

The size of the file can't be sent, I'm trying to figure how to make it small enough.
I tried splitting the sheets into two part and it still over 300 and I've try converting the file to pdfs.
one being 323 KB and the smallest being 311 KB.
support
Administrateur
Posts: 11024
Joined: 07 December 2009, 16:32

Re: CDS-RGY200L laser

Post by support »

You can email it to us.
The Lighting Controller
DJ~MMiMER
Posts: 7
Joined: 25 October 2012, 06:21

Re: CDS-RGY200L laser

Post by DJ~MMiMER »

Which is? :?:
support
Administrateur
Posts: 11024
Joined: 07 December 2009, 16:32

Re: CDS-RGY200L laser

Post by support »

The Lighting Controller
support
Administrateur
Posts: 11024
Joined: 07 December 2009, 16:32

Re: CDS-RGY200L laser

Post by support »

We are unable to do the profile, because the dmx details are not clear and not complete.
DMX mode: Nine-channel control: mode (off / DMX static images / DMX Dynamic Graphics / System voice / automatically),
Static pattern / motion graphics, XY scanning speed, play speed, size, color)
Please ask the manufacturer to update this text.
The Lighting Controller
DJ~MMiMER
Posts: 7
Joined: 25 October 2012, 06:21

Re: CDS-RGY200L laser

Post by DJ~MMiMER »

Actually the fixture is really 16 channel because I hooked this up to a DMX and tested out all the channels.
That why I thought it was confusing for them to say 9 channels when it 16. I'm assuming that it mixed up with another model because this manual came with two different model, the other model have remote control.
Post Reply

Return to “Fixture profile requirement for Editor”