Chauvet Wash 150 Programming questions [fixed]

[epeterson]

I have 4 Wash 150's that are hanging from our racking. I want to program those at each venue...do some minor fine adjustments for spiking the stage and such...When I have the scene open in editor and I am adjusting CH1 X pan or CH2 Y tilt...the light turns off and comes back on when I release the mouse from the slider. Is there a way to keep the light on when I am adjusting the pan/tilt. Sure would make it easier...I am sure I am missing something.


Thanks,

Eric

[epeterson]

Follow up to above post. Here are my channel settings for the light I am programming.

CH1-171 (pan)
CH2-165 (tilt)
CH3-255 (upan)
CH4-137 (utilt)
CH5-Disabled (pantilt_speed)
CH6-8 (shutter)
CH7-0 (red)
CH8-0 (green)
CH9-255 (blue)
CH10-0 (white)
CH11-Disabled (dimmer)
CH12-Disabled (color_macro)
CH13-Disabled (Speed_control)
CH14-19 (control) Lamp on off reset. I have a feeling this is my issue
CH15-Disabled (Movement_macro)

Thanks,

Eric

[epeterson]

I figured it out....duh...CH14 set to 19 makes it "Enable pan/tilt move-in-black" Oops....

Sorry all.

Eric