Lanta Hex | LEDJ Stage Wash | Kam Quadtrix | Equinox Tracer

ask here the fixture profile you need for Editor
Post Reply
alextoft
Posts: 3
Joined: 30 October 2012, 16:39

Lanta Hex | LEDJ Stage Wash | Kam Quadtrix | Equinox Tracer

Post by alextoft »

Howdy folks,

Just got my Xpress Plus today, very impressed so far. I was hoping you might have a few minutes spare to create some profiles for the following:

Lanta HexBeam - 3 Channel Mode
http://www.lantalighting.com/app/upload ... ndbook.pdf

LEDJ Stage Wash 36 - 6 Channel Mode
http://prolight.co.uk/images/media/LEDJ ... 02-um0.pdf

Kam LED Quadtrix - 12 Channel Mode
http://www.kam.co.uk/media/file/product ... manual.pdf

Equinox Tracer Laser - 12 Channel Mode
http://prolight.co.uk/images//media/EQL ... 40-um0.pdf

Thank you very much! :D
Top
support
Administrateur
Posts: 11024
Joined: 07 December 2009, 16:32

Re: Lanta Hex | LEDJ Stage Wash | Kam Quadtrix | Equinox Tracer

Post by support »

Done.
The Lighting Controller
Top
alextoft
Posts: 3
Joined: 30 October 2012, 16:39

Re: Lanta Hex | LEDJ Stage Wash | Kam Quadtrix | Equinox Tracer

Post by alextoft »

Thank you. First class service!
Top
Post Reply

Return to “Fixture profile requirement for Editor”