Shehds - 200w 2eyes Blinder Warm/Cool

ask here the fixture profile you need for Editor
Post Reply
ryan.aul7
Posts: 2
Joined: 12 March 2026, 14:20

Shehds - 200w 2eyes Blinder Warm/Cool

Post by ryan.aul7 »

I could use an 8ch profile for this Shehds 200w Blinder Warm/Cool

Manual link: https://drive.google.com/file/d/1MYCkfL ... sp=sharing

Link to light (just in case): https://shehds.com/products/shehds-2eye ... LMQAvD_BwE


thanks
support
Administrateur
Posts: 11316
Joined: 07 December 2009, 16:32

Re: Shehds - 200w 2eyes Blinder Warm/Cool

Post by support »

Hello,
The profile is done.
The Lighting Controller
ryan.aul7
Posts: 2
Joined: 12 March 2026, 14:20

Re: Shehds - 200w 2eyes Blinder Warm/Cool

Post by ryan.aul7 »

perhaps this is user error. even though the patching and labeling seem correct, they seem to be mix-matched channel to channel. Right now channel 1 controls cob1-coolwhite while it should be a master, also, channels are grouped when the goal is independent control.
support
Administrateur
Posts: 11316
Joined: 07 December 2009, 16:32

Re: Shehds - 200w 2eyes Blinder Warm/Cool

Post by support »

We made the library following the manual:
Image
If there is an error in the manual, please post the correct list of channels & levels and we will redo the library.
The Lighting Controller
Post Reply

Return to “Fixture profile requirement for Editor”