I see that you have added the profiles for the various DMX modes, but this fixture appears as 1 tiny color changer rather than a long bar with 24 individual lights in it.
I'm trying to program a chase but can't visualize it in 3D. Is it possible to display the fixture in 3D mode as 1/2/4/8 lights depending on the DMX mode?
Chauvet - COLORband RGB
Re: Chauvet - COLORband RGB
In order to do what you need, you will need to "trick" the software. To do this, instead of importing 1pc COLORband, you will need to import 8pcs of a 3ch fixture.
Basically, you're going from 1pc x 24ch = 24ch to 8pcs x 3ch = 24ch. This will allow the 3D view to "see" the 8 separate sections and also give you individual control.
Basically, you're going from 1pc x 24ch = 24ch to 8pcs x 3ch = 24ch. This will allow the 3D view to "see" the 8 separate sections and also give you individual control.
Allan Reiss
Senior Product Manager
CHAUVET DJ
Senior Product Manager
CHAUVET DJ
Re: Chauvet - COLORband RGB
I read that post before creating this one, but hoped that since Chauvet is selling both the hardware (DMX fixture) and the dongle/software that there might be an easier method in the works that just hadn't shipped yet. I started to re-program the fixtures. Thanks!