import a v6 show in v9

post here general topics for software
Post Reply
joostxxl
Posts: 6
Joined: 03 November 2012, 13:59

import a v6 show in v9

Post by joostxxl »

i run a show on a computer with version 6 of the software.
i made a export to a usb and import that show in version 9. when i start the sam cue some lights won't work or do strange things.
I see on the dmx monitor different outputs in version 6 and 9.
on version 7 its work but on version 8 and 9 it wont.
[image]
[image]
joostxxl
Posts: 6
Joined: 03 November 2012, 13:59

Re: import a v6 show in v9

Post by joostxxl »

this is the export of the lightshow i made from version 6

https://www.dropbox.com/s/8bnek45dvpme1 ... d.zip?dl=0
support
Administrateur
Posts: 10769
Joined: 07 December 2009, 16:32

Re: import a v6 show in v9

Post by support »

For each new major software version (V5, V6, V7, V8, V9), we do our best in order to allow you to read your lightshow from V(x) to V(x+1), with sometimes some additional things to do. But it is not possible from V(x) to V(x+3).
Sorry for that.
The Lighting Controller
joostxxl
Posts: 6
Joined: 03 November 2012, 13:59

Re: import a v6 show in v9

Post by joostxxl »

ok , thanks.
Post Reply

Return to “General software”