Equinox - Microbar par system

ask here the fixture profile you need for Editor
Post Reply
DJBart
Posts: 4
Joined: 27 November 2017, 14:17

Equinox - Microbar par system

Post by DJBart »

Equinox Micropar bar system
https://prolight.co.uk/product/micropar-bar-system

Thanks
support
Administrateur
Posts: 11024
Joined: 07 December 2009, 16:32

Re: Equinox - Microbar par system

Post by support »

So far, each parcan does not have multiple "pixels".
It looks the best use of this fixture is in the section "Editor" of our software (https://forum.thelightingcontroller.com ... m.php?f=25).

Could you please double check if you want the profile for the section "Pixels", or if you prefer the profile for the section "Editor" ?
The Lighting Controller
DJBart
Posts: 4
Joined: 27 November 2017, 14:17

Re: Equinox - Microbar par system

Post by DJBart »

Sorry that i did it wrong . I think than it's must be in the sector Editor.
Greetz
DJBart
Posts: 4
Joined: 27 November 2017, 14:17

Re: Equinox - Microbar par system

Post by DJBart »

Could you replace them ore close these topics because i can't remove them.
Thank you !
support
Administrateur
Posts: 11024
Joined: 07 December 2009, 16:32

Re: Equinox - Microbar par system

Post by support »

Profile done.
The Lighting Controller
Post Reply

Return to “Fixture profile requirement for Editor”