Hi.
My interface works properly on my MacBook. I want to use it on my new touchscreen PC using Windows 10 Home. I was able to load the driver and the Xpress is being recognized by the software. However the PC link is not blinking. How to resolve?
Thanks,
Rodney
Express 512 No PC Link [fixed]
Re: Express 512 No PC Link
Please follow this: viewtopic.php?f=3&t=188
And then confirm your interface is well found by the software.
And then confirm your interface is well found by the software.
The Lighting Controller
Re: Express 512 No PC Link
I've done all your instructions and The software detects the interface. However the PC Link still does not blink.
Re: Express 512 No PC Link
Weird.
Please check with another computer. If same results, please return your interface for maintenance service.
Please check with another computer. If same results, please return your interface for maintenance service.
The Lighting Controller
Re: Express 512 No PC Link
I have tried another box from a friend and the same issue. It could be a Windows 10 driver orbither setup issue.
Re: Express 512 No PC Link
So far, when the software says "interface found", it means the driver is well installed.
The Lighting Controller
Re: Express 512 No PC Link
Should it be 32 or 64 bits? 2013 or 2015? Have you tried it on Windows 10 Home?
Re: Express 512 No PC Link
Can you still help. The box blink on a macbooc, Not on PC with Windows Home.
Re: Express 512 No PC Link
I got it to blink by specifically choosing Driver 13 and under 64 bits folder.