Blizzard - Solar Ray

ask here the fixture profile you need for Editor
Post Reply
raverezra
Posts: 12
Joined: 21 June 2014, 01:49

Blizzard - Solar Ray

Post by raverezra »

Requesting profile for Blizzard Lighting SolarRay

link to “Solar Ray Manual Rev A (Web).pdf” in my Dropbox:

https://www.dropbox.com/s/lxxcvghqhobf0 ... 9.pdf?dl=0


SolarRay™
Ultra Bright Warm White
5x5 Pixel Matrix Blinder

Meet the SolarRay

FEATURES:

25* high efficiency 3-Watt Edison LEDs

Projects intense narrow beams of 2,800k warm white light

Flexible panel system with integrated locks

Easy configuration and setup via built-in LCD control panel

Individual pixel control in 25-channel DMX mode

29 built-in programs + auto run with speed adjustment

Kling-Net/Art-Net support allows auto-configuration over Ethernet

8° beam angle, pitch: 60 mm

DMX Channels: 6/25

Strobe Rate: 0-20 Hz

Strong cast aluminum housing

Internal Protection: IP20

Smooth dimming curve with flicker-free operation (400Hz)

High-performance fanless convection cooling

Mounting bracket with dual locking knobs & ¼ turn quick clamp bracket

2x RJ45 Ethernet in/out data connections

3-pin DMX input/output

PowerCon™ compatible AC power in/out connectors


TECH SPECIFICATIONS:

Weight & Dimensions

Width: 11.8 inches (300 mm)

Depth: 3.8 inches (96 mm)

Height: 11.8 inches (300 mm)

Weight: 8.9 lb. (4 kg)


Power

Operating Voltage: 100-240VAC, 50-60 Hertz

Power Consumption: 75W, 1.02A, PF: .61

Light Source: LED 25* 3-Watt Edison 2,800k Warm White LEDs


Optical

Beam Angle: 8 degree

Luminous Intensity: 13,500 Lux @ 1m, 5,120 Lux @ 2m

Pixels: 5 x 5

Pixel Pitch: 60mm


Thermal

Max. Operating Temp.: 104 degrees F (40 degrees C) ambient

Control

Protocol: Art-Net™, Kling-Net, USITT DMX-512

DMX Channels: 6/25-Channels

Input/Output: 3-pin XLR Male/Female

Other Operating Modes: Standalone, Master/Slave, Auto, Sound Active
support
Administrateur
Posts: 11022
Joined: 07 December 2009, 16:32

Re: Blizzard Solar Ray

Post by support »

Done.
The Lighting Controller
Post Reply

Return to “Fixture profile requirement for Editor”