Microh - Ultra Trinity 280

ask here the fixture profile you need for Editor
Post Reply
roneysmathews
Posts: 2
Joined: 20 September 2015, 05:40

Microh - Ultra Trinity 280

Post by roneysmathews »

Good evening folks

I require a profile for the Microh - Ultra Trinity 280 moving head fixture for both 16 and 24 channels. The manual for this fixture can be found here http://www.microhpro.com/images/product ... manual.pdf

Thanks in advance folks.
roneysmathews
Posts: 2
Joined: 20 September 2015, 05:40

Re: Require a profile for Microh - Ultra Trinity 280

Post by roneysmathews »

HI Folks

Just a reminder, I was wondering if anyone can create a profile for me for the Microh Ultra Trinity 280 moving head for both 16 and 24 channels. The channel information can be found at http://www.microhpro.com/images/product ... manual.pdf

I need to setup this lights by friday so we can use it for a light show on Saturday and Sunday.

Please assist.

Thanks
support
Administrateur
Posts: 11024
Joined: 07 December 2009, 16:32

Re: Require a profile for Microh - Ultra Trinity 280

Post by support »

Done.
The Lighting Controller
Post Reply

Return to “Fixture profile requirement for Editor”