Hello -
The XpressRack 1024 Not Fading Out Between Scenes. For Example;
Button 1, Zone 1 = White
Button 2, Zone 1 = Red
Button 3, Zone 1 = Blue
Press Button 1, Fixture Fades on White, Press Button 2, and White "snaps" off (like a light switch) and Blue Fades In.
Is there a way to get the lights to fade from one color to the next? Even putting the colors in 2 different zones does not solve the issue.
Any advice would be appreciated.
XpressRack 1024 Not Fading Out Between Scenes
-
- Posts: 2
- Joined: 28 March 2023, 21:38
Re: XpressRack 1024 Not Fading Out Between Scenes
We do not have a "white, red, blue" fixture, so we made a test with a "red, green, blue" fixture.
The fade in standalone mode seems to work ok.
Here is our lightshow.
Please import it and compare with your lightshow.
The fade in standalone mode seems to work ok.
Here is our lightshow.
Please import it and compare with your lightshow.
- Attachments
-
- 2023_09_06_test_Rack1024_standalone_fade.zip
- (22.92 KiB) Downloaded 640 times
The Lighting Controller
-
- Posts: 2
- Joined: 28 March 2023, 21:38
Re: XpressRack 1024 Not Fading Out Between Scenes
I am not sure if I am explaining what I mean correctly.
The setup is Multiple fixtures set to a certain color on a certain button in Zone 1
Those same fixtures then are asked to change to a new color on button 2, same zone.
Instead of crossfading out, the first color just turns off and the second color fades in.
What I am trying to acomplish is this;
Press button 1, Fixtures Fade On to Color1 - Press button 2 Color1 fades out, Color2 fades in
The setup is Multiple fixtures set to a certain color on a certain button in Zone 1
Those same fixtures then are asked to change to a new color on button 2, same zone.
Instead of crossfading out, the first color just turns off and the second color fades in.
What I am trying to acomplish is this;
Press button 1, Fixtures Fade On to Color1 - Press button 2 Color1 fades out, Color2 fades in
Re: XpressRack 1024 Not Fading Out Between Scenes
This is what we have understood, and our standalone scenes do the crossfades.
Please send the fixture profile (.txt) of your DMX fixture ; we will try to adapt our ligthshow to it.
Please send the fixture profile (.txt) of your DMX fixture ; we will try to adapt our ligthshow to it.
The Lighting Controller