different fixtures not working well together [fixed]

[jason5d]

Hi

I'm trying to make some generator movement only programs with Chauvet Trio and Chauvet 357z irc movers but the pan/tilt channel doesn't show in channels menu.

Ive tried it with 30ch and 15ch on the Trios - no joy


thx

[support]

We checked the profiles and we found an error in the IntimidatorSpot375ZIRC(15ch) model.
The fourth channel is "pan fine" instead of "tilt fine".

Please use the attached updated file.

[jason5d]

thx,
that works with the trio 30ch version, I've noticed the trio 30ch doc has some errors please check the 1st mode channel

here's the Manual:

https://www.chauvetdj.com/wp-content/up ... M_Rev5.pdf

Any chance you can add button in steps menu at the top that can change all fade/step buttons to step

[support]

I've noticed the trio 30ch doc has some errors please check the 1st mode channel

Noted.

Any chance you can add button in steps menu at the top that can change all fade/step buttons to step

To do that:

[jason5d]

I mean all the channels. eg when you click said button all the dmx channels across the step menu would change to step and when I click again they would change back to fade

thx

[support]

For that, select all channels (ctrl or shift + mouse click) (red check mark) and press the transition button of any of them.