The Lighting Controller

Hi
Been playing with 6.0 and fine more and more nice funtions!
It would be nice if its possilble to switch between the 2d and the 3d screen( directly in editor) then wouldnt need to set editor small so see changings directley.
and is it posible to add buttons under/beside of the 2d screen for selecting the odd/even/all same fixtures (now only with rightclicking mouse)

Grtzz Marco

Good idea to have a 3d buton ...I just make several groups one odd one even and so on then just click on the group list
avoiding the 2d and right clicking
mm

switch between the 2d and the 3d screen( directly in editor)

Nice idea but 3DView is a very complex program, so we are not able to include it into Editor. Moreover, 3DView must also work with Live. With many computers, 3DView takes may be 90% of the total processor time required for our complete software. So we can not use 2*3DView screens.

add buttons under/beside of the 2d screen for selecting the odd/even/all

This was our original idea, and we gave it up for right click menu, in order to save space for 2DView screen.
Everything must be ok with a notebook pc (1024*600 pixels).

oke tnks for the answer