Page 1 of 2
dmx setup,, please help!!!!!
Posted: 27 August 2011, 07:24
by showband mondeo
i know i´m a little bit boring but i need help,
i have phantom 250 spot connected to laptot(winxp) with cable.
i want to know where can i setup dmx adress so each one can work separeted. i setup dmx adress on phantom 250 spot, its oo1, and 015.
http://www.scribd.com/doc/16454359/Show ... pot-Manual#
Re: dmx setup,, please help!!!!!
Posted: 27 August 2011, 11:32
by support
The dmx addressing should be done in application "Setup" > tab "DMX addressing".
For more understanding of dmx addressing, we suggest you to import the "demo_show" and to study it.
Re: dmx setup,, please help!!!!!
Posted: 31 August 2011, 10:47
by showband mondeo
support wrote:The dmx addressing should be done in application "Setup" > tab "DMX addressing".
For more understanding of dmx addressing, we suggest you to import the "demo_show" and to study it.
can u do it for me, i dont know how to do it.. here are photos of my setup and u have manual for phantom spot 250 from my earlier post.
can u setup me dmx adress because my spot are not working properly,. i can´t move them separately.. please help help help...
)
thank u milion times...
Re: dmx setup,, please help!!!!!
Posted: 31 August 2011, 14:50
by support
It looks like the fixture details and the dmx addressing are correctly done.
We do not understand what we have to do for you !
Re: dmx setup,, please help!!!!!
Posted: 01 September 2011, 08:55
by showband mondeo
i dont know, maybe it s problem in spots, i dont know what to do
(
Re: dmx setup,, please help!!!!!
Posted: 01 September 2011, 09:03
by support
In our side, the dmx addressing looks correct.
Please check that the dmx address of each light is correct.
Re: dmx setup,, please help!!!!!
Posted: 01 September 2011, 09:24
by showband mondeo
one more question, what does it mean reverse tilt and pan? do i mark them on each head (on picture one) onre just one??
Re: dmx setup,, please help!!!!!
Posted: 02 September 2011, 09:51
by showband mondeo
???????
Re: dmx setup,, please help!!!!!
Posted: 04 September 2011, 02:10
by Sound Storms Ent.
showband mondeo wrote:one more question, what does it mean reverse tilt and pan? do i mark them on each head (on picture one) onre just one??
Really? You know what your PAN and TILT are right? You know how to control those from DMX right? Now if you were to REVERSE it what do you think would happen? Possibly instead of Pan being Left To Right / 0 to 255 it would probably now be Right To Left / 0 to 255..... Right? Makes Sense?
You Would Use The Reverse Option if lets say one head was up right and one head was upside down. This way they both move the same direction.
Re: dmx setup,, please help!!!!!
Posted: 27 September 2011, 13:17
by hughhu@live.cn
Dear Support,
Good day.
This is hugh, one of our customer in Europe imported 12 RGB 36W LED Wall washer from us, but he said your Sweet light software can not identify our LED wall washer, and he said the wall washer can use the DMX 512 controller made in China, so my question can Sweet light software be applied for every RGB wall washer?Hank
This is very urgent, we need your reply.
Thanks very much.
please email me: hughhu(at)live.cn