Page 1 of 2
BeamZ - Fuze 75B Beam
Posted: 02 June 2022, 14:16
by integration85
Bonjour,
Pourriez-vous, à l'aide des deux documents ci-joints, créer 2 machines :
IGNITE 180 BEAM LED (2 modes 13 ch et 17 ch)
FUZE 75B BEAM (1 mode 12ch)
Merci d'avance,
Cordialement.
https://drive.google.com/drive/folders/ ... sp=sharing
Re: FIXTURES BEAMZ
Posted: 02 June 2022, 17:16
by support
Il faut une autorisation pour accéder aux fichiers.
Re: FIXTURES BEAMZ
Posted: 08 June 2022, 17:08
by integration85
Bonjour,
Est-ce que l'autorisation est bonne pour vous ?
Cordialement.
Re: FIXTURES BEAMZ
Posted: 08 June 2022, 21:12
by support
Non, toujours pas.
Vous pouvez aussi utiliser
wetransfer.
Re: FIXTURES BEAMZ
Posted: 09 June 2022, 06:25
by integration85
Bonjour,
Je viens de vous envoyer un mail.
Re: FIXTURES BEAMZ
Posted: 09 June 2022, 07:21
by support
Pas vu.
Peut-être effacé par erreur.
Pouvez-vous SVP le renvoyer avec le sujet "FORUM THELIGHTINGCONTROLLER - FIXTURES BEAMZ" ?
Re: FIXTURES BEAMZ
Posted: 09 June 2022, 07:55
by integration85
Bonjour,
C'est fait.
Re: FIXTURES BEAMZ
Posted: 09 June 2022, 15:20
by support
Rien reçu !
Avez-vous bien envoyé à : support (at) thelightingcontroller.com ?
Re: FIXTURES BEAMZ
Posted: 09 June 2022, 17:28
by integration85
Je viens de retransféré le mail.
Re: FIXTURES BEAMZ
Posted: 09 June 2022, 17:59
by support
Here is the manual file from "integration85":
https://we.tl/t-duwLvw95BZ