Page 1 of 1
remote - some lights won't move
Posted: 16 December 2019, 21:44
by jason5d
MY press 512plus has issues, sometime it works and sometimes some of the lights won't move.
The problem goes away when I swap to my spare 512 plus.
Is it worth getting the 512 plus fixed? It's over 5 years old, if so how much?
thx.
Re: remote - some lights won't move
Posted: 17 December 2019, 15:28
by support
sometimes some of the lights won't move
If we right understand, this means some dmx fixtures are still responding correctly ?
If yes, this looks more like a dmx line problem.
If the dmx interface is wrong, all dmx fixtures should not respond.
Re: remote - some lights won't move
Posted: 17 December 2019, 17:45
by jason5d
thanks for your reply
If you think it's a line issue, what about the problem going away when I switch to the back up 512pro?
I use 2 universes, I'll try swapping the interfaces over.
note. i use a 512 and a 512pro with another 512pro as a spare