Page 1 of 1
Lights not Responding (dip switches) [fixed]
Posted: 15 February 2011, 22:35
by socalmagic
I have an X-Factor and the main screen shows that the universe is found, but my lights don't respond. I'm not sure what version that I have, but I donwloaded and installed the program in November. I installed the USB driver today. There is no lights where it says DMX input. I changed out the cable and light to see what might be causing it. Please help me resolve this problem.
Re: Lights not Responding
Posted: 16 February 2011, 02:22
by tomrbland
Ok, the first step is to download the latest software. I don't know if you are a mac or a PC but I presume you are running ShowXpress? The software is here:
http://download.thelightingcontroller.c ... howXpress/
Secondly, check that you have the DMX "traffic lights" turned on in builder or live (whichever you are using)
That's all I can thing of right now, but it is 2:20am so I may have forgotten something.
Hope that helps,
Tom
Re: Lights not Responding
Posted: 19 February 2011, 21:05
by socalmagic
Thanks for the suggestions, Tom. I figured out the problem. I had to set the DMX switches on the lights one less than ShowXPress was telling me to.