The Lighting Controller

Im new to sweetlight so its probably something simple.

but when i view my fixtures in editor they overlap ive only got 2 fixtures in so far first fixture is on channels
1,2,3 and The 2nd fixture is on channels 1,2,3,4,5.

Anyhelp greatly received thanks

They certainely have both the same dmx address.
One of them must be changed.
(Setup > dmx addressing > dmx addressing setting > dmx address)

Thats great just seen what i had done i have fixture 1 set ad dmx address 1 and the fixture 2 as dmx address 2 thanks very much and a very speedy reply.

If fixture#1 has 3 channels, fixture#2 must be in address 4 (or higher), in order to not overlap fixture#1.