The Lighting Controller

Hello,
Please help my.
I have a led par type : Showtec 56 par
I can't find a fixure for this.
This is the product:http://www.highlite.nl/index.php/highli ... /showbar_4
I can't find a manual on internet



Thank you

Miquel

Je zou de handleiding erbij moeten posten

Dit zou het product moeten zijn:
http://www.highlite.nl/index.php/highli ... /showbar_4

Alleen er is geen handleiding te vinden dus die zou je het archief moeten halen.

Groete Swen

http://www.rjshop.nl/CmsData/Artikelen/ ... 20rev1.pdf

Manual

Hello,

Do you need the fixture file for the Showbar or the fixture file for the LED PAR?
Because the set which you mentioned with the hyperlink is without a LED Par.

Please let me know so I can make the file for you.

Best regards
Bas

Bas_Showtec wrote:Hello,

Do you need the fixture file for the Showbar or the fixture file for the LED PAR?
Because the set which you mentioned with the hyperlink is without a LED Par.

Please let me know so I can make the file for you.

Best regards
Bas

i will have a fixture for the showbar .

thank you so mutch

Hi,

for this unit it isn't logical to make a fixture file.
Because you can patch the unit in a lot of different ways:
For example:

Output 1 = channel 001
Output 2 = channel 002
Output 3 = channel 003
Output 4 = channel 004

But it can also be
Output 1 = channel 001
Output 2 = channel 150
Output 1 = channel 028
Output 2 = channel 400.

So each output is an dimmer on it self.

In the file which I have added to this message is just 1 dimmer fixture.

Best regards
Bas