30 channel dmx led strip controller

[chadpressley]

So what is the signal packet speed for the 512 and 512plus? Is it 2ms?

[chadpressley]

This decoder does work with the dmx512plus. https://www.amazon.com/gp/aw/d/B00Q1N1N ... ref=plSrch

[vincentcolignon]

Any news on this subject ?

I just bought 4 x 30ch dmx controllers for led strips and they don't work on my 512.
Is there a way to make them work ?

Anyone ?

Thank you,

[support]

The dmx signal of this interface is not user customisable.
It has the same timing for the past 8 years.

[supermercer]

I just purchased some - 30 channel decoders from aliexpress I use the showXpress and the Xpress 512 dongle for the rest of my lighting. The dmx is not read by the decoder. If I plug the decoder into a basic light board it works fine. I've been searching the forums for answers. Some suggest it could work with an x-factor but not the 512. Also I'm wondering if a firmware upgrade would fix it.

[support]

Sorry but the dmx signal of this interface is not user customisable.

FYI: the new dmx interfaces D512S and D1024 have a different firmware (and a different dmx signal).