Page 1 of 1
Irradiant - SRL-6078-2
Posted: 05 October 2010, 18:18
by jkeefauver
Need profile for this PAR Can (both long and short models) - assume same profile. Could anyone help?
Re: Profile for Irradiant SRL-6078-2
Posted: 05 October 2010, 20:09
by tomrbland
What's wrong with using the generic Par can profile?
Re: Profile for Irradiant SRL-6078-2
Posted: 05 October 2010, 20:22
by jkeefauver
Likely nothing but I am entirely new to this and am not a lighting professional. I am working on this project for my daughters' children's theater. If a "generic" profile is what "support" recommends, I am fine with that.
Re: Profile for Irradiant SRL-6078-2
Posted: 05 October 2010, 21:58
by tomrbland
I'm not "support" but I have been using the software for many years.
I have now looked up your fixture. I will create the profile for you - I read it as a generic PAR can as it doesn't sound like a LED fixture. Usually you will be asked to direct support to the DMX spec sheet.
You can find the Fixture profile at
http://www.tombland.org.uk/*rest of link removed due to GoogleBot issues*
Sorry for the confusion
Re: Profile for Irradiant SRL-6078-2
Posted: 05 October 2010, 22:34
by jkeefauver
Re: Irradiant - SRL-6078-2
Posted: 06 October 2010, 12:50
by tomrbland
Yep, see my previous post for the profile. I made it for you. Simply import this in to the show by going to (I dont know what OS you use but in XP it is) C:\Documents and Settings\USERNAME\TheLightingController\LightShows\SHOWNAME\fixtures\
Just place the .txt file in here and you will see your fixture in setup.
Re: Irradiant - SRL-6078-2
Posted: 06 October 2010, 13:06
by jkeefauver
Perfect. Thank you sir.