Page 1 of 1
Optima - Par64b LED Par Can
Posted: 27 September 2010, 17:37
by Auggie Hill
http://www.optimalighting.com/OPTIMA-LI ... ry_id=4364
can you help with a profile for this fixture? I tried adding it in myself and couldn't get it to work correctly unless I left off channel 5 (strobe).
Re: Optima - Par64b LED Par Can
Posted: 28 September 2010, 07:17
by support
Done.
FYI, channel 5 must be "shutter" with two levels: "open" and "strobe". The dmx values of these two levels are not mentionned in the manufacturer page, so may be you will have to adjust them.
Re: Optima - Par64b LED Par Can
Posted: 28 September 2010, 17:50
by Auggie Hill
Thanks for the help. I found the profile from the link in the read before posting thread. could you possibly help in explaining how i get that into my fixture profiles. sorry to be such a bother, but i am brand new to this.
Re: Optima - Par64b LED Par Can
Posted: 29 September 2010, 09:33
by support
It is explain here:
viewtopic.php?f=25&t=111&p=369#p369
you have to copy this file here: "home_directory/LightShow/YourShow/fixtures/" (since version 6.24, it is possible to open the "home_directory/LightShow/" folder from ControlBoard->Settings)