The Lighting Controller

In editor / Steps, i made 8 carefully positioned steps with my four JBSystems / Led Victory Scan's.
Worked fine in real life when first created and added to a Live-button.
Now, a day later, in real life, i only see the lights from the first step. No beams in the following steps, but the mirrors are moving...
What's going wrong?
I have this same issue with my four JBSystems clubscan's. Some scene's added to a Live-button still works fine, other scene's are without light, only mirror's moving.
In 3Dview all works as programmed.

I have to use a wireless DMX transmitter and receiver (http://en.briteq-lighting.com/product/4 ... 20Transmit) which works fine with classic DMX controllers.
Should the D512 DMX interface and The Lighting Controller software work fine with it too?

Please check there is no midi/dmx patch to the dmx outputs.

Should the D512 DMX interface and The Lighting Controller software work fine with it too?

We never tried with this device, but it should.

support wrote:Please check there is no midi/dmx patch to the dmx outputs.

No, there isn't see screenshot.

support wrote:

Should the D512 DMX interface and The Lighting Controller software work fine with it too?

We never tried with this device, but it should.

It works yes, just checked this out, wondering if could have been involved in the issue i'm struggling with.
i'm using your latest stable 7.1.63 (2015 july 23) software witch Mac OSX El Capitain.

Please post a screenshot of the dmx outputs bargraph.
it will show all patch (dmx and midi).

have i look yourself in my whole show. Dropbox download link is https://dl.dropboxusercontent.com/u/561 ... 202015.zip

Please check all your scenes respect this: viewtopic.php?f=72&t=3614

i've fixed this problem meanwhile.
Don't really know what i was doing wrong i what i did to fix in, but for the moment it works. Had something to do with overruling i thin.

thanks for your support.