Page 1 of 1
CDS-RGY200L laser
Posted: 10 January 2013, 23:29
by DJ~MMiMER
I could only get the file that was sent to me in excel format.
Re: CDS-RGY200L laser
Posted: 11 January 2013, 08:36
by support
You can add a post with an attached ZIP file of the XLS file.
Re: CDS-RGY200L laser
Posted: 11 January 2013, 08:48
by DJ~MMiMER
The size of the file can't be sent, I'm trying to figure how to make it small enough.
I tried splitting the sheets into two part and it still over 300 and I've try converting the file to pdfs.
one being 323 KB and the smallest being 311 KB.
Re: CDS-RGY200L laser
Posted: 11 January 2013, 14:15
by support
You can email it to us.
Re: CDS-RGY200L laser
Posted: 11 January 2013, 17:01
by DJ~MMiMER
Which is?

Re: CDS-RGY200L laser
Posted: 13 January 2013, 14:48
by support
Re: CDS-RGY200L laser
Posted: 14 January 2013, 07:53
by support
We are unable to do the profile, because the dmx details are not clear and not complete.
DMX mode: Nine-channel control: mode (off / DMX static images / DMX Dynamic Graphics / System voice / automatically),
Static pattern / motion graphics, XY scanning speed, play speed, size, color)
Please ask the manufacturer to update this text.
Re: CDS-RGY200L laser
Posted: 14 January 2013, 22:57
by DJ~MMiMER
Actually the fixture is really 16 channel because I hooked this up to a DMX and tested out all the channels.
That why I thought it was confusing for them to say 9 channels when it 16. I'm assuming that it mixed up with another model because this manual came with two different model, the other model have remote control.