Page 1 of 1
Chauvet - Intimidator 1.0
Posted: 04 September 2012, 12:58
by hueyt
Please tell me the Intimidator 1.0 will work with show xpress!! I just bought 6 of these from a guy to fill
out my show! I can't find it in the fixture library! I also bought the 512 plus...so I'm way in deep now!
Thanks
Hugh
Re: Chauvet 1.0 Scanner Not in Show Xpress Library...help!!
Posted: 04 September 2012, 13:40
by support
The profile is in folder "../Chauvet/Dj/Discontinued/".
Re: Chauvet - Intimidator 1.0
Posted: 04 September 2012, 16:51
by hueyt
I found that...thank you! Now if I'm running DMX, should the #10 dip switch be up or down?
I'm trying my best to make it communicate... just moving faders on the screen.
Re: Chauvet - Intimidator 1.0
Posted: 05 September 2012, 06:35
by support
Sorry but we can not help for fixture dip switch setting.
Yes, move faders on Editor screen (with dmx button green).
Re: Chauvet - Intimidator 1.0
Posted: 05 November 2012, 23:46
by DJ 3pm
Dipswitch 10 should be set to OFF and dipswitches 1-9 should be set to ON to set starting DMX channel identity.
If the following dipswitches are set, your DMX starting address would be 1:
1=ON
2=OFF
3=OFF
4=OFF
5=OFF
6=OFF
7=OFF
8=OFF
9=OFF
10=OFF
If the following dipswitches are set, your DMX starting address would be 5 (since there are 4 channels per unit, this would be the next sequential address if you were controlling each individually):
1=ON
2=OFF
3=ON
4=OFF
5=OFF
6=OFF
7=OFF
8=OFF
9=OFF
10=OFF