second AKAI APC mini [fixed]

[Bonifacedj]

I hope I have helped you and if there are any questions I will do my best to answer them!

Thanks for your effort!
I just saw your post now... i must have forgotten to mark "Notify me when a reply is posted".

Hi All
I've just tried 2 APC Mini with last beta V8.0.92, and it works very fine.
The software sees 2 APC Mini (attached picture) canal 1 & 2, while my Macbook sees only one APC Mini, same notes and data for the both.

Thanks a lot for this V8

I saw in another post from you that version 8.1 is out.
Where can i download it?

[beuzz60]

Hi !
You can download it here :
http://download.thelightingcontroller.com/software/V8/

Don't miss the fix:
http://download.thelightingcontroller.c ... re/V8/new/

[Bonifacedj]

@beuzz60: thx voor mensioning the fix, i've would have missed it otherwise.

It seems to be worth buying an second AKAI APC mini again now.
Need more sliders!

[Bonifacedj]

i gave Version 8 a try with my AKAI APC mini and novation launchpad MK2 and wow, it simply works without hassle. No need voor MidiPipe software anymore.

@beuzz60: Did you try one or more from the nine channel faders on your second AKAI APC mini?
No conflict with the channel faders when using both APC mini's?

If not, 'i m gonna buy me two more APC mini's since i'm hungry for more physical channel faders.

[beuzz60]

I'm still working on V7, with APC Mini & BCF2000 (Midi Pipe).
So when I tried V8 with my 2 APC Mini, I haven't see any conflict with the same channel faders and knobs but I didn't try all the faders.
I will try next time if you want.

[Bonifacedj]

I will try next time if you want.

Would be great!
thx in advance.

[Bonifacedj]

i've just installed V8. Looks good.
Ordered a second AKAI APC mini and meanwhile i'm trying my novation launchpad MK2 as second controller.
But can't get the button trigger to work with the launchpad MK2.

See attachment for the working settings of my APC mini.
How to configure to button trigger's settings with the launchpad MK2?

[Niffo]

What if you click on "learn" and then press a button on the Launchpad ?

[Bonifacedj]

@Niffo: tried that several times. Nothing happens.

- I assume i have to chose Device 2.
- channel settings 'im not sure; 1 or 2?
- i left "note" like it was.

I've tried different device numbers and channel settings.
Rebooted my Mac several times.
Also unplugged my launchpad several times. Lights blink when i connect it again. Nothing wrong with the launchpad because i've been using it as sampler with virtualDJ on another Apple laptop till now.

Only my APC mini works with sweetlight which i' have been programming for many months.
So i have used 'learn' many times when programming mij APC mini.

[Niffo]

Does anyone managed to run the Launchpad MK2 (Novation ?) with the software ?
Seems to be a Novation Launchpad (not MK2) on this post : viewtopic.php?f=76&t=3749#p15626