Big dipper - k 500+

ask here the fixture profile you need for Editor
Post Reply
DJFrank
Posts: 7
Joined: 18 May 2012, 02:40

Big dipper - k 500+

Post by DJFrank »

Hi,

Could it be possible to have the profile of the K500+ from big dipper.

Here is the dmx chart.

http://www.visualproductions.nl/forum/i ... pic=1630.0

Thank you

Frank
support
Administrateur
Posts: 11024
Joined: 07 December 2009, 16:32

Re: Big dipper - k 500+

Post by support »

Done.
The Lighting Controller
DJFrank
Posts: 7
Joined: 18 May 2012, 02:40

Re: Big dipper - k 500+

Post by DJFrank »

Thank you

Frank
DJFrank
Posts: 7
Joined: 18 May 2012, 02:40

Re: Big dipper - k 500+

Post by DJFrank »

HI, I had ask you for the profile of this fixture and had given you some dmx address i found on the internet. It turns out that its the wrong one, and i did try it and it dint work. here is the one from the book. Terribly sorry about that. it only has 4 chanels


1: Control Mode
0-63 sound control
64-127 single patterns
128-191 auto play
192-255 shut off

2: Paterns
there is over 36 paterns, let me know if you want me towrite them


3: Scan dot
0-255 Dot scanning speed

4: Scan line
0-255 Line scanning speed




Thank you for revising it

Frank
support
Administrateur
Posts: 11024
Joined: 07 December 2009, 16:32

Re: Big dipper - k 500+

Post by support »

Done.
The Lighting Controller
DJFrank
Posts: 7
Joined: 18 May 2012, 02:40

Re: Big dipper - k 500+

Post by DJFrank »

Thank you very much!

Frank
Post Reply

Return to “Fixture profile requirement for Editor”