Rockville - Mini-4

ask here the fixture profile you need for Editor
Post Reply
Djsonic77
Posts: 7
Joined: 04 December 2024, 03:33

Rockville - Mini-4

Post by Djsonic77 »

I am a ShowXpress DMX controller owner and have encountered an issue while trying to add several Rockville lighting fixtures to my setup. Specifically, I'm unable to locate the following Rockville products in the fixture dropdown menu:

Rockville Best Par 60
Rockville Best Par 50
Rockville Mini-4
I was wondering if there are any plans to add these Rockville fixtures to the ShowXpress library in an upcoming update. If not, could you please advise on the best way to incorporate these fixtures into my setup? Would creating custom profiles be a viable solution?

Thank you for your assistance with this matter.
support
Administrateur
Posts: 11021
Joined: 07 December 2009, 16:32

Re: rockville fixtures

Post by support »

Please provide a link to download the manual of this DMX fixture and we will do the profile for you.
FYI: https://forum.thelightingcontroller.com ... f=3&t=2453

Alternatively, you can also do the profile by yourself in the module "Fixtures".
The Lighting Controller
support
Administrateur
Posts: 11021
Joined: 07 December 2009, 16:32

Re: rockville fixtures

Post by support »

The profile is done.
The Lighting Controller
Djsonic77
Posts: 7
Joined: 04 December 2024, 03:33

Re: Rockville - Mini-4

Post by Djsonic77 »

where can i find the profile because it is not showing up under the rockville dropdown menu
support
Administrateur
Posts: 11021
Joined: 07 December 2009, 16:32

Re: Rockville - Mini-4

Post by support »

It will be on the next update of our software.
In the meantime you will find it here: http://download.thelightingcontroller.c ... or_Editor/
Here here is how to proceed to import it: https://forum.thelightingcontroller.com ... f=3&t=2453
The Lighting Controller
Post Reply

Return to “Fixture profile requirement for Editor”