Channel Limit for Tilt

declare your lighting equipment
Post Reply
Posts: 15
Joined: 24 October 2022, 06:06

Channel Limit for Tilt

Post by Urs »

Is there a way to set a channel limit and minimum, for example in a fixure or in a step scene? I have moving heads that can make 270 degree tilt movements. But I would like them to only be able to do 90 degrees, for example, starting at 90 degrees. (The degree numbers are just an example). I have tried the offset setting, but it is only possible to adjust one side.
Posts: 10651
Joined: 07 December 2009, 16:32

Re: Channel Limit for Tilt

Post by support »

This is not possible in this version of our software (V9) ; sorry for that.

And this is possible in our new software (VII BETA version). ... ic.php?t=7
The Lighting Controller
Posts: 2
Joined: 13 March 2024, 22:52

Re: Channel Limit for Tilt

Post by 6ko »


You can play with zoom in the same windows as offset.
Negative zoom will reduce max amplitude, offset will define min amplitude.
Post Reply

Return to “Editor - Fixtures”