External contacts using

usb to dmx - 1024 dmx channels - 19'' rack - 16 flash buttons - IR remote controller - 8 external contacts - calendar

External contacts using

Postby support » 03 March 2020, 16:12

Image

Connect the external switch #1 to "pin 1" and "COM" to trigger the standalone scene #1.
Connect the external switch #2 to "pin 2" and "COM" to trigger the standalone scene #2
...
Connect the external switch #8 to "pin 8" and "COM" to trigger the standalone scene #8.
The Lighting Controller
support
Administrateur
 
Posts: 10538
Joined: 07 December 2009, 16:32

Re: External contacts using

Postby support » 22 April 2020, 08:47

Important
In order to avoid bounce, you have to add a 100nF capacitor as close as possible to the switch device.

Image
The Lighting Controller
support
Administrateur
 
Posts: 10538
Joined: 07 December 2009, 16:32

Re: External contacts using

Postby support » 07 June 2021, 07:53

In case of you need more than 8 external contacts, 8 more are available from an unassembled 2*5 pins connector inside the interface (on the front panel pcb).
Image
The Lighting Controller
support
Administrateur
 
Posts: 10538
Joined: 07 December 2009, 16:32


Return to Rack1024

Who is online

Users browsing this forum: No registered users and 1 guest