Midi sliders
-
- Posts: 11
- Joined: 23 June 2014, 08:49
Midi sliders
Hi everyone! I have a behringer bcf-2000. I would like to use midi sliders in LIVE for scene speed, colors, master dimmer for spots, etc. Is it possible? can anzbodz help me with this?
-
- Posts: 224
- Joined: 18 June 2012, 12:09
Re: MIDI SLIDERs
Yes you can depending on which version software you are currently using...
Midi in is strait forward...
viewtopic.php?f=3&t=1499
Once midi communication is established with you computer open your lighting software.
In live...Right click on button you intend to use with a slider, select trigger midi, learn, and move slider you intend to use,
Once trigger is learned apply
Midi in is strait forward...
viewtopic.php?f=3&t=1499
Once midi communication is established with you computer open your lighting software.
In live...Right click on button you intend to use with a slider, select trigger midi, learn, and move slider you intend to use,
Once trigger is learned apply
-
- Posts: 11
- Joined: 23 June 2014, 08:49
Re: MIDI SLIDERs
It works only with midi-buttons, but not with sliders. Wenn i try to trigger a slider, it always shows the different values...
-
- Posts: 224
- Joined: 18 June 2012, 12:09
Re: MIDI SLIDERs
Make sure Sliders/Faders are transmitting as a continuous controller (CC) not note on/off...
-
- Posts: 11
- Joined: 23 June 2014, 08:49
Re: MIDI SLIDERs
where should i check this?Earl Harvey wrote:Make sure Sliders/Faders are transmitting as a continuous controller (CC) not note on/off...
Re: Midi sliders
What messages the controller sends are configured in the controller. You'll need to check the manual for the Behringer.