Stairvile - LED Par Can

declare your lighting equipment
Locked
Nick Dowling
Posts: 4
Joined: 10 June 2014, 19:28

Stairvile - LED Par Can

Post by Nick Dowling »

I am trying to setup my Stairville LED PAR 64's in sweetlight, I have managed to get all the channels to work the only problem is under channel 6 (Mode) I cant get the light to work on sound to light when I set the channel to sound to light it just lights up green :cry: I have checked all the channels over & over and the values I have looked at the number of channels and confirmed that there are 7 channels. Any help/iddeas welcome
support
Administrateur
Posts: 10649
Joined: 07 December 2009, 16:32

Re: Stairvile LED Par Can

Post by support »

Please tell us the link to download the PDF of this fixture ; we will check that.
The Lighting Controller
Nick Dowling
Posts: 4
Joined: 10 June 2014, 19:28

Re: Stairvile LED Par Can

Post by Nick Dowling »

http://images4.thomann.de/pics/atg/atgd ... line_2.pdf

This is the manual I am using, I notice that some of the values shown on channel 6 overlap? I have assumed this is a typo Sweet Light dose not allow you to overlap I assume for obvious reasons.
support
Administrateur
Posts: 10649
Joined: 07 December 2009, 16:32

Re: Stairvile - LED Par Can

Post by support »

Done.
The Lighting Controller
Nick Dowling
Posts: 4
Joined: 10 June 2014, 19:28

Re: Stairvile - LED Par Can

Post by Nick Dowling »

Not sure if Done means sorted or you are looking into the issue? Just need to get sorted. I appreciate your support.
support
Administrateur
Posts: 10649
Joined: 07 December 2009, 16:32

Re: Stairvile - LED Par Can

Post by support »

We just made the personality file.
So far, it has 7 dmx channels.
Please import this file, and re-do the dmx addressing, considering 7 channels per fixture.
The Lighting Controller
Nick Dowling
Posts: 4
Joined: 10 June 2014, 19:28

Re: Stairvile - LED Par Can

Post by Nick Dowling »

Wicked, I'll have a look and see how I get on. Thanks for that.
Locked

Return to “Setup”