Page 1 of 1
Pan tilt movement angle
Posted:
13 February 2013, 17:19
by MickeyMick
Hi guys,
Is it possible to change your angle/degree for pan tilt? cause with me it doenst work.
My scanner doesnt react on the new angle degree values.
I need this option so that my circle movent doenst hit the sealing
Re: Pan tilt movement angle
Posted:
13 February 2013, 22:03
by support
We just checked ; it works here.
PS: this parameter is exclusively for 3DView.
Re: Pan tilt movement angle
Posted:
13 February 2013, 23:38
by MickeyMick
ah, oke.
I thought it would be a variabel for my scanner too
.
How can i change this for my scanner. the beam now reaches its own(self) fixture :O
Re: Pan tilt movement angle
Posted:
14 February 2013, 08:04
by support
It looks like a fixture hardware problem !
Re: Pan tilt movement angle
Posted:
14 February 2013, 14:57
by MickeyMick
Can it not be fixed by software?
Re: Pan tilt movement angle
Posted:
14 February 2013, 15:16
by support
the beam now reaches its own(self) fixture :O
Sorry, but our software is not able to fix this problem.
Re: Pan tilt movement angle
Posted:
06 August 2013, 14:17
by Randomseed
Some yokes have movement degree range settings (Chauvet LED XXX spots for example). If you have that its very useful for create a more usable movement range.
In software I would think they just need to add the ability to restrict a channels value to a user defined range of values (say over 100 but under 200) so the slider values could never go outside that range and restricting the range.