akai APC FIRE

live control with midi devices

akai APC FIRE

Postby gérald » 26 October 2018, 15:08

Bonjour,

je viens d'installer un contrôleur AKAI APC FIRE, mais je ne peut pas modifier les couleurs sur les pads.

Comment faire?

Sweetlight version 9.1.4
gérald
 
Posts: 16
Joined: 22 April 2014, 21:20

Re: akai APC FIRE

Postby gérald01 » 31 October 2018, 00:57

Voilà, je ne peut pas changer, modifier les couleurs ou même éteindre les pads.

Sur les autres contrôleurs pas de problèmes.

En attendes d'une réponse
gérald01
 
Posts: 16
Joined: 05 June 2018, 23:35

Re: akai APC FIRE

Postby support » 31 October 2018, 12:04

Désolé, on a pas cet appareil ; on ne peut donc pas vous aider.

Chaque appareil demande des valeurs différentes pour gérer les couleurs des boutons.
Il n'y a pas de standard.
Ces valeurs sont normalement spécifiées dans le manuel de l'appareil.
The Lighting Controller
support
Administrateur
 
Posts: 10538
Joined: 07 December 2009, 16:32

Re: akai APC FIRE

Postby gérald » 31 October 2018, 13:30

Bonjour,

J'ai essaye différente valeur de valeurs en "data2 on" et "data2 off" en sortie midi et en clonant l'entrée mais rien ne se passe de 0 a 127.
gérald
 
Posts: 16
Joined: 22 April 2014, 21:20

Re: akai APC FIRE

Postby gérald01 » 05 November 2018, 18:54

Bonsoir,

Quelqu'un aurait t'il une explication sur le fait de pas avoir le contrôle des couleurs sur les pads d'un contrôleur MIDI .

Merci pour les réponses éventuel.

Gérald
gérald01
 
Posts: 16
Joined: 05 June 2018, 23:35

Re: akai APC FIRE

Postby BartKrap » 08 November 2018, 15:44

Try changing the user mode. It might not work with the software in certain modes.
Head of lighting, lighting designer and lighting operater at De Zoom and Pinky's in Renesse and Ron van der Veen Entertainment.
BartKrap
 
Posts: 215
Joined: 06 June 2016, 18:37
Location: Netherlands

Re: akai APC FIRE

Postby gérald01 » 08 November 2018, 19:33

Thank you for your reply
How to change user mode?
gérald01
 
Posts: 16
Joined: 05 June 2018, 23:35

Re: akai APC FIRE

Postby BartKrap » 08 November 2018, 21:51

Press the button on the top left. Try user 1 or user 2.
Head of lighting, lighting designer and lighting operater at De Zoom and Pinky's in Renesse and Ron van der Veen Entertainment.
BartKrap
 
Posts: 215
Joined: 06 June 2016, 18:37
Location: Netherlands

Re: akai APC FIRE

Postby gérald01 » 08 November 2018, 23:08

With sweetlight impossible to change mode.
gérald01
 
Posts: 16
Joined: 05 June 2018, 23:35

Re: akai APC FIRE

Postby BartKrap » 10 November 2018, 23:19

gérald01 wrote:With sweetlight impossible to change mode.

Ahh okay, try changing with ableton before starting up sweetlight.
It might have the same issue as the APC40 MKII has.
Head of lighting, lighting designer and lighting operater at De Zoom and Pinky's in Renesse and Ron van der Veen Entertainment.
BartKrap
 
Posts: 215
Joined: 06 June 2016, 18:37
Location: Netherlands

Next

Return to Midi

Who is online

Users browsing this forum: No registered users and 4 guests