AKAI APCmini - LED horizontal 8 round buttons only red color

[Bonifacedj]

I'm struggling with the LED colors of the horizontal round buttons on my AKAI APC mini.
I want them act like the 8 vertical round buttons i've programmed into blinking green (2) and green (1) according to this:

-------------------------
0 = off

2 = blinking green
1 = green

6 = blinking yellow.
5 = yellow

4 = blinking red
3 = red
--------------------------

I can choose red / yellow / green on all the buttons of my APC mini, works perfect, except with the horizontal eight rond buttons.
Although i set them to 2 and 1, they behave like blinking red (4) and red (3).

When i set them actually to 4 and 3, they behave like red (3) and red (3).
I cant' get them to yellow either.

I've disconnect the APC mini several times, rebooted my Mac, nothing works.
What's wrong with these eight horizontal round buttons?
My goal is to set al the sixteen round buttons into blinking green (2) and green (1) for using them into one page as Macro's.

- I've tried on another Mac in bootcamp-windows in demo_show_V7. Same issue.

Please help.
If you need my light-show to check, you can download him here: https://dl.dropboxusercontent.com/u/561 ... 016%29.zip

thanks in advance.

[Earl Harvey]

There are only red LEDs in the round buttons...

[Bonifacedj]

@Earl Harvey: Do you mean there are only red LED's in the horizontal round buttons available?
Because i have created green LED's in the eight vertical round buttons on the right.