Hi Support,
I have an APC Mini MK2 too, I've used it in a couple of live shows and so far works great.
Other than customising the RGB appearance of a button (tip for users: other than the AKAI official table in black and white, look for reference tables online with the colours filled in) it is possible to have them either stay on, blink or pulse in various ways by altering the "channel" value in SweetLight.
I've been trying to set the buttons to behave like this (using orange as an example):
- button OFF: colour orange steady
- button ON: colour orange blinking
I can't get it to work as desired; setting the "channel" value in the output line to "blink" will make it blink all the time (regardless of the state of the button); setting the "channel" value with something other than 01 in the Midi In line won't make the button work anymore.
Is there anyone with suggestions on how to work around that?
I'm guessing that having two "Midi Out" options would allow users to set their buttons to blink when on and steady when off.
Midi out ON:
Device || Channel || Data ||..
Midi out OFF:
Device || Channel || Data ||..
AKAI's document on communication protocol, for reference: https://cdn.inmusicbrands.com/akai/atta ... 20v1.0.pdf