Page 1 of 1

Fade in timing on DMX Rack

PostPosted: 12 January 2019, 16:30
by NicolaTravaglia
Morning,

before an information: my quick dmx version is old and i don't know the firmware version of the rack.

Problem: i stored my scenes on DMX Rack, but i have 2 problem

1) when i stored a scene on the button there isn't the loop, so after the duration of the cue went off.
to avoid this i copied the same cue, always in zone 1, and so the cue is on until i press an other button.

2) now my real problem is that the cues play with a fade in of 10 seconds, not in snap.

could be the software version, or the firmware, or i wrong something?

thanks a lot for the help.

Re: Fade in timing on DMX Rack

PostPosted: 12 January 2019, 19:04
by support
We suggest you to double-check the generated scene in the software.
To do that, please follow this: https://thelightingcontroller.com/viewt ... =74&t=5125