Morning,
before an information: my quick dmx version is old and i don't know the firmware version of the rack.
Problem: i stored my scenes on DMX Rack, but i have 2 problem
1) when i stored a scene on the button there isn't the loop, so after the duration of the cue went off.
to avoid this i copied the same cue, always in zone 1, and so the cue is on until i press an other button.
2) now my real problem is that the cues play with a fade in of 10 seconds, not in snap.
could be the software version, or the firmware, or i wrong something?
thanks a lot for the help.
Fade in timing on DMX Rack
Re: Fade in timing on DMX Rack
We suggest you to double-check the generated scene in the software.
To do that, please follow this: https://forum.thelightingcontroller.com/viewt ... =74&t=5125
To do that, please follow this: https://forum.thelightingcontroller.com/viewt ... =74&t=5125
The Lighting Controller