HTP/LTP

create pages with buttons to trigger scenes

HTP/LTP

Postby daan44444 » 17 May 2020, 23:14

Hello,

Would it be possible to add a feature to select HTP or LTP for each channel? When played back that one scene would behave like an HTP scene for the channels that are selected.

For example, I have one scene turned on with a fixture at 50% intensity. Another scene is a two step fade scene which goes from 0-100% intensity on the same light. When I fade this channel in from 0% the lights behave like LTP and they will suddenly snap to 0% fade and go up to 100% as the fader is raised. I want the second scene only to kick in from the intensity the first scene has been set to. In this case from 50%. So make this a dynamic functionality to use over multiple scenes, HTP functionality is a must.
daan44444
 
Posts: 27
Joined: 26 July 2019, 00:06

Re: HTP/LTP

Postby TimH » 18 May 2020, 00:22

I would give this a +1 if it was implemented as an option in the drop down list when you right click on a button in live.

A simple option for "LTP" or "HTP" on any steps scene in live could provide a lot of new options for functionality for users.
I also think this would not be overly complicated for the user, and reasonably simple to implement.

However i realise that the current functionality of the software is LTP across the board so maybe this is the sort of major change that would have to happen in Version 10? Also some sort of visual feedback on the button itself to let the users know it's HTP would be useful. A little "HTP" logo on the button itself when that option is selected. I still think LTP should be the default, so no visual feedback is needed when this default option is selected.
TimH
 
Posts: 335
Joined: 03 April 2017, 02:28

Re: HTP/LTP

Postby support » 18 May 2020, 08:24

Noted to check that for next major version.
The Lighting Controller
support
Administrateur
 
Posts: 8972
Joined: 07 December 2009, 16:32


Return to Live - Buttons

Who is online

Users browsing this forum: No registered users and 6 guests