no lights in Live, with "dimmer/R/G/B" fixtures [fixed]

[Bonifacedj]

@support: you mean when starting theLightingController software in the club where i work, first thing i have to do is going to Editor / Steps / select all my four sweeperbeams by group, (key D) and open the dimmer channel and then all my gerenated pixel scenes will light up and work until i quit the application?

[support]

We prefer one of these two solutions:
1. another button in Live, with channels "dimmer" at 100%
2. force the channel "dimmer" to 100% in the "Fixture properties > Shared channels", in Pixels

[Bonifacedj]

your solution number 1 is easy but cost's me a button.
i'll try your second solution first. I''ve changed the Shared channels for each of my four sweeperbeams to this now as you can see on the screenshot:



Will try it out in the club next weekend.
thx for the suggestions.

[Bonifacedj]

2 force the channel "dimmer" to 100% in the "Fixture properties > Shared channels", in Pixels

This second solution was the trick (your first solution didn't work) with every new chase i made (didn't work with the already made older ones) thanks Guy's.
I can start now.