Movement stuttering

create scenes with shape generator

Movement stuttering

Postby thorehl » 05 June 2019, 10:17

I'm getting strange stuttering from Generator when movers go slow.

[ img]http://i68.tinypic.com/a42bz6.jpg[/img] // Edit // Pic hashed out coz of broken link

Video below showing both 3DVeiw, and DMX data

Youtube
Last edited by thorehl on 31 October 2019, 16:48, edited 1 time in total.
Thore
lydlys.com - Freelance sound & light engeneer
Using HW: D1024 & D512
Controller: 2x Akai APC mini
my DIY light mixer
thorehl
 
Posts: 233
Joined: 20 January 2015, 22:16

Re: Movement stuttering

Postby support » 05 June 2019, 14:11

Makes sense, because no pan/tilt channels.
The Lighting Controller
support
Administrateur
 
Posts: 10538
Joined: 07 December 2009, 16:32

Re: Movement stuttering

Postby thorehl » 08 June 2019, 06:04

I don't understand.
Thore
lydlys.com - Freelance sound & light engeneer
Using HW: D1024 & D512
Controller: 2x Akai APC mini
my DIY light mixer
thorehl
 
Posts: 233
Joined: 20 January 2015, 22:16

Re: Movement stuttering

Postby support » 08 June 2019, 14:42

Sorry we would like to say "because there is no micro pan and micro tilt channels".
The Lighting Controller
support
Administrateur
 
Posts: 10538
Joined: 07 December 2009, 16:32

Re: Movement stuttering

Postby DeeStage » 27 June 2019, 17:51

To say it with other words:

Your Moving lights have just Pan/Tilt channels --> 8bit resolution = 255 steps possible from left to the right border in generator
If your moving light would have Pan/Tilt channels and Pan/Tilt_fine channels --> 16bit resolution = 65536 steps from the left to the right border in generator

For instance:

If you have a movinghead with 540deree in Pan movement (from 1 end_point to the other one) and no Pan_fine channel, the movinghead could turn by 2.1degree per dmy value

If you have Pan/Tilt_fine channels, your movinghead could turn by 0.008 degree... Its much more accurate
DeeStage
 
Posts: 61
Joined: 19 May 2015, 18:40

Re: Movement stuttering

Postby thorehl » 31 October 2019, 16:46

Sorry for long awaited reply.

I do understand 8 vs 16-bit
The part I don't understand is if I assign Pan-channel in 2 steps, create a button in Live, add slider to it and control the fixture manual, it moves smooth.
In turn, if I create a generator scene with just 2 points horizontal only (for Panning), the fixture stutters, yet the pan speed used is "virtually" the same (as close to as I manually can manage).
Example is done from dmx value 1 to 255 and back to 1
Thore
lydlys.com - Freelance sound & light engeneer
Using HW: D1024 & D512
Controller: 2x Akai APC mini
my DIY light mixer
thorehl
 
Posts: 233
Joined: 20 January 2015, 22:16


Return to Editor - Generator

Who is online

Users browsing this forum: No registered users and 8 guests

cron