best practice
Moving at different speed from point1 to point 2
Moving drives one line in 3 sec. Tilt with red. When point 2 is reached, dimmer off and the moving should go back to point 1 as fast as possible. Is that possible?
best practice Moving different speed from point1 to point2
-
- Posts: 36
- Joined: 16 January 2019, 15:53
Re: best practice Moving different speed from point1 to po
You can easily do that in the tab Steps.
For each step, you can adjust:
- the duration of the step (means the speed from the previous step to the new one)
- the level and the fade mode of each channel
For each step, you can adjust:
- the duration of the step (means the speed from the previous step to the new one)
- the level and the fade mode of each channel
The Lighting Controller
-
- Posts: 36
- Joined: 16 January 2019, 15:53
Re: best practice Moving different speed from point1 to po
Thanks for the information.
But do you mean steps? At Steps, I have the problem that I can not determine the dimmer curve. Or?
But do you mean steps? At Steps, I have the problem that I can not determine the dimmer curve. Or?
Re: best practice Moving different speed from point1 to po
The transition is linear in Steps.
For speed change in Generator, you can set different distances between the points in the curve.
For speed change in Generator, you can set different distances between the points in the curve.
The Lighting Controller
-
- Posts: 36
- Joined: 16 January 2019, 15:53
Re: best practice Moving different speed from point1 to po
I do not understand what you mean, unfortunately? how can i do that with a line?
Re: best practice Moving different speed from point1 to po
We suggest you to watch the tutorials, in order to understand a bit more how works Generator: https://forum.thelightingcontroller.com/viewt ... =85&t=3077
The Lighting Controller