best practice Moving different speed from point1 to point2

create scenes with shape generator

best practice Moving different speed from point1 to point2

Postby Tarzan4711 » 27 January 2019, 07:28

best practice

Moving at different speed from point1 to point 2

Moving drives one line in 3 sec. Tilt with red. When point 2 is reached, dimmer off and the moving should go back to point 1 as fast as possible. Is that possible?
Tarzan4711
 
Posts: 33
Joined: 16 January 2019, 15:53

Re: best practice Moving different speed from point1 to po

Postby support » 27 January 2019, 16:58

You can easily do that in the tab Steps.
For each step, you can adjust:
- the duration of the step (means the speed from the previous step to the new one)
- the level and the fade mode of each channel
The Lighting Controller
support
Administrateur
 
Posts: 8975
Joined: 07 December 2009, 16:32

Re: best practice Moving different speed from point1 to po

Postby Tarzan4711 » 28 January 2019, 15:10

Thanks for the information.
But do you mean steps? At Steps, I have the problem that I can not determine the dimmer curve. Or?
Tarzan4711
 
Posts: 33
Joined: 16 January 2019, 15:53

Re: best practice Moving different speed from point1 to po

Postby support » 28 January 2019, 15:42

The transition is linear in Steps.

For speed change in Generator, you can set different distances between the points in the curve.
The Lighting Controller
support
Administrateur
 
Posts: 8975
Joined: 07 December 2009, 16:32

Re: best practice Moving different speed from point1 to po

Postby Tarzan4711 » 28 January 2019, 17:10

I do not understand what you mean, unfortunately? how can i do that with a line?
Tarzan4711
 
Posts: 33
Joined: 16 January 2019, 15:53

Re: best practice Moving different speed from point1 to po

Postby support » 28 January 2019, 17:48

We suggest you to watch the tutorials, in order to understand a bit more how works Generator: https://thelightingcontroller.com/viewt ... =85&t=3077
The Lighting Controller
support
Administrateur
 
Posts: 8975
Joined: 07 December 2009, 16:32


Return to Editor - Generator

Who is online

Users browsing this forum: No registered users and 2 guests