Symmetrical fast scenes

create scenes with steps

Symmetrical fast scenes

Postby spirosaslanis » 12 April 2020, 03:36

Fast symmetrical scenes
I want to have the possibility to create fast symmetrical scenes. Example we have 8 moving heads and we want scene like the photo below. For example to create it now we put the same value in tilt and we put the value 100 - 110 - 120 - 130 - 140 - 150 - 160 - 170 in pan value for 8 moving heads. I want to ask if is possible to have one generator and put there the middle value of tilt (in my example 135) then to put the step between the moving heads (in my example 10) and the generator to create automatically the values in moving heads.
Attachments
43270778-0058-472A-A582-C3EFD4A45C30.jpeg
43270778-0058-472A-A582-C3EFD4A45C30.jpeg (20.25 KiB) Viewed 1475 times
spirosaslanis
 
Posts: 12
Joined: 05 May 2013, 23:26

Re: Symmetrical fast scenes

Postby thorehl » 12 April 2020, 10:53

If it's just a static look your looking for that's easy to edit from job to job, then just use generator.
Editor > Generator.
Select your MH, check the Pan/Tilt channel on the left. Remove all but one point from the begynning circle.
At this point you should only have one point for Pan/Tilt
Now, right-click on the Pan/Tilt/uPan/uTilt channel and select "Generator Fixtures"
Select tab Pan/Tilt offset, check "Fan pan offset"
And off you go. Drag fixture 1 to right, and fixture 8 to left. Done :D
Once done, just close the popup window, hit Play and then Stop to see the fixtures positions. The little square is the marker u can use to move the center.
Thore
lydlys.com - Freelance sound & light engeneer
Using HW: D1024 & D512
Controller: 2x Akai APC mini
thorehl
 
Posts: 201
Joined: 20 January 2015, 22:16


Return to Editor - Steps

Who is online

Users browsing this forum: No registered users and 1 guest