fader "red" does not respond [fixed]

create scenes with steps

fader "red" does not respond [fixed]

Postby PEDCLIGHT » 29 April 2015, 14:42

The delay I was talking about is the channel 1 fader of my Lustr+ fixtures while in the steps screen. I am just working with the laptop and the software...not connecting to controller or any actual fixtures. When trying to push the fader on channel 1(red) on universe 2 the fader does not respond right away. It will eventually move after a couple of seconds. I believe their is a conflict between the red and cyan colors. I changed the cyan color on channel 5 of the fixture to ucyan and this enables the channel 1fader(red) to move freely. I did notice that when moving the channel 1 fader that the ucyan fader also turns green? If I change the ucyan color to yellow this does not happen. I have also opened my light show in version 6.333 and the faders work normally. There seems to be a conflict between red and cyan/ucyan on the new version of the software. Let me know if you are able to duplicate this. Thanks
PEDCLIGHT
 
Posts: 7
Joined: 22 June 2010, 03:44

Re: 3DView Crashes

Postby support » 29 April 2015, 21:05

We are able to reproduce the problem.
We will check that and come back to you, as soon as possible.
The Lighting Controller
support
Administrateur
 
Posts: 10538
Joined: 07 December 2009, 16:32

Re: 3DView Crashes

Postby Niffo » 30 April 2015, 17:21

Fixed for next release.
Niffo
Administrateur
 
Posts: 715
Joined: 07 December 2009, 15:59
Location: France

Re: 3DView Crashes

Postby PEDCLIGHT » 30 April 2015, 18:40

Perfect. Thank you for your help.
PEDCLIGHT
 
Posts: 7
Joined: 22 June 2010, 03:44

Re: fader "red" does not respond [fixed]

Postby support » 04 May 2015, 09:54

The fix is avaliable here: viewtopic.php?f=2&t=3677
The Lighting Controller
support
Administrateur
 
Posts: 10538
Joined: 07 December 2009, 16:32


Return to Editor - Steps

Who is online

Users browsing this forum: No registered users and 9 guests